Cryogenic Valve Leakage Test System(Fabricated equipment) Detail Image Cryogenic Valve Leakage Test System(Fabricated equipment) Test Field and Standards Cryogenic Valve Leakage Test System(Fabricated equipment) Test Field and Standards Cryogenic Valve Leakage Test Standards BS 6364:1984 and KS B 2821:2007 Applications Performance verification test for identifying valve leakage at ultra-low temperatures (-196℃)This is a valve test conducted at low and ultra-low temperatures using liquefied nitrogen, dry ice, and other substances.Body leakage test Main Specifications Cryogenic test chamber sizeSmall chamber : valves of 6“(150A) or smaller : 700 mm (L) x 500 mm (W) x 500 mm (H)Medium chamber : valves of 16“(400A) or smaller : 1,000 mm (L) x 1,000 mm (W) x 1,000 mm (H)Large chamber : valves of 30“(750A) or smaller : 1,500 mm (L) x 1,500 mm (W) x 1,400 mm (H)Max. working pressure : GAS 2,000 bargValve open/close and torque measurement : Max. 200 kgf·mLeakage MeasurementFlow rate : 30 L/minMax. pressure : 50 bargCentral monitoring and control systemTemperature measurement : Able to monitor up to 5 thermocouplesPressure measurement : Able to monitor 2 locations (one on inlet, the other one outlet)Leakage amount monitoring
He Leak Detector (HELIOT 9001W1) Detail Image He Leak Detector (HELIOT 9001W1) Test Field and Standards He Leak Detector (HELIOT 9001W1) Test Field and Standards Cryogenic valve leakage test Standards BS 6364:1984KS B 2821:2007 He Leak Detector (HELIOT 9001W1) Details Extreme environmental hazardous gas leak test Standards ISO 15848-1:2015 ISO 15848-2:2015 API STD 624:2014 Applications Support gas leakage detection tests for products, such as valves, pipes, gaskets, and pressure vessels. Main Specifications Detected gases: Helium and hydrogenMinimum measurement amount: 5E-13 Pa·㎥/sLeakage indicatorHelium 0.01E-12 ~ E-6Pa·㎥/sHydrogen 0.01E-8 ~ E-5Pa·㎥/sPump speed at inlet: 5 L/sMain pump capacity: Turbo 31 L/sOthers : Supports six languages, including Korean, and features a wireless controller with remote control function.
Repeating Pressurization Test Equipment (Fabricated equipment) Detail Image Repeating Pressurization Test Equipment (Fabricated equipment) Test Field and Standards Repeating Pressurization Test Equipment (Fabricated equipment) Test Field and Standards Valve room temperature durability test Standards KS B 2304:2001KS B ISO 5208:1993API STD 527:2014ASME B16.34-2017 Repeating Pressurization Test Equipment (Fabricated equipment) Details Extreme Environmental Hazardous Gas Leak Test Standards ISO 15848-1:2015ISO 15848-2:2015API STD 624:2014 Applications Evaluation of valve seal durability performance in repeated pressurization and decompression environments Main Specifications Fluid used : WaterWater pressure supply : Max. 1,200barMax. test pressure : 1,200barTest temperature : Room temperature (AMB)
High pressure gas compress equipment for high pressure valves (KAGT-62/152H) Detail Image High pressure gas compress equipment for high pressure valves (KAGT-62/152H) Test Field and Standards High pressure gas compress equipment for high pressure valves (KAGT-62/152H) Test Field and Standards Valve room temperature durability test Standards KS B 2304:2001KS B ISO 5208:1993API STD 527:2014ASME B16.34-2017 Applications Airtight performance and pressure resistance performance evaluation of high-pressure gas valves Main Specifications Testing pressure : max. 2,500 kgf/cm2Safety chamber size : 1,800 mm (L) x 1,300 mm (W) x 2,000 mm (H)Testing temperature : Room temperatureTesting fluid : Air, He, and N2 GasLeakage amount measurement in the sheet leakage test : Max. 3.0 L/minAble to check leakage from the body strength test using a gas detector
Valve Fire Safe Test Equipment (Fabricated equipment) Detail Image Valve Fire Safe Test Equipment (Fabricated equipment) Test Field and Standards Valve Fire Safe Test Equipment (Fabricated equipment) Test Field and Standards Valve fire safety test Standards API 607:2016API 6FA:2018KS B ISO 10497:2004 Applications Valve heat-resistance test under fireFire safety test for valves using LPG gas and oxygen to be heated directly by external heating, such as in a fire situationCheck the leakage of valve sheet by heating the valve at 700–1,000 ℃ for 30 min. Main Specifications Testing pressure : 200barTemperature sensor : AMB ~ 1,000℃Pressure sensor : 50bar, 300bar, 500barHeating unit: Up to 10 heaters are used.Cooling unit: Capable of cooling to 100 ℃ or lower in 10 minLeakage measurement device: Precision scale and load cell installation (front and back of the test equipment)
Valve Spring Test Machine Detail Image Valve Spring Test Machine Test Field and Standards Valve Spring Test Machine Test Field and Standards Valve spring performance test Standards JASO C 605:2006RS R 0062:2006 Applications Determine the test section of the valve internal spring and measure the spring constant value Main Specifications Drive system : AC servo motor driveTest speed : 0.5 ~ 500mm/minLoad cell : 30ton, 2ton, 2kgf(3set)TEST SPACE : Φ300mm × h1,200mm
Flow Test and flow coefficient test system (ftfcts-01) Detail Image Flow Test and flow coefficient test system (ftfcts-01) Test Field and Standards Flow Test and flow coefficient test system (ftfcts-01) Test Field and Standards Flow Test and flow coefficient test Standards KS B 2101:2003IEC 60534-2-3:2015ANSI/ISA-75.02.01-2008 Applications Flow test of valve with water and measurement of flow coefficientProduct size for flow coefficient measurement : 15 ~ 500A Main Specifications Pump specificationsFlow : 3,000㎥/h, lifting height : 20mFlow : 6㎥/h, lifting height : 37mAC inverter motor (fully enclosed type)Central monitoring and control systemElectronic flow meter(Magnetic), ultrasonic flow meter(Ultra Sonic)Tank : 6.5㎜(L) × 5.5㎜(W) × 3.0㎜(H)Piping system: closed loopPiping and flange specifications : 10k 50A, JIS 10k 150A, 10k 400A
Discharge Coefficient Value and Flow Rate Measuring System for Safety (Relief) Valves(Fabricated equipment) Detail Image Discharge Coefficient Value and Flow Rate Measuring System for Safety (Relief) Valves(Fabricated equipment) Test Field and Standards Discharge Coefficient Value and Flow Rate Measuring System for Safety (Relief) Valves(Fabricated equipment) Test Field and Standards Flow test and flow coefficient measurement test Standards KS B 2101:2003IEC 60534-2-3:2015ANSI/ISA-75.02.01-2008 Applications Proper operation test evaluation is conducted to determine whether the safety valve meets the desired performance standards under real operating conditions.Testing and evaluation for overseas ship classification and standard acquisition of safety valves Main Specifications Fluid : WaterPump performanceCapacity : rated 1,000m3/hTotal head : 70mSpeed : 1,750rpmNPSHre : 6mMin. Flow : 537.8m3/hMax. head at rated impeller : 76mNSS(suction specific speed) : 12,995.1m3/hMotorR. output : 290kWSyn. speed : 1,800rpmVoltage : 3,300VCycle : 60Hz
Test equipment for valves for hydrogen stations (Pressure & Durability test) (Fabricated equipment) Detail Image Test equipment for valves for hydrogen stations (Pressure & Durability test) (Fabricated equipment) Test Field and Standards Test equipment for valves for hydrogen stations (Pressure & Durability test) (Fabricated equipment) Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018 Applications Leakage test and repeated pressurization test of the valve for a hydrogen filling stationSafety evaluation of high-pressure gas valves Main Specifications Pump (gas compressor) specificationsFlow : 100L/minOperation : Air DrivenRepeat control : Max. 102,000cycles (10cycles/min = 6 sec/cycle)Testing pressure : Max. 105MPa (1,050bar)Testable valve size : Max. 1″(25A)Test fluid: nitrogen, helium, hydrogen 5% mixed gas (nitrogen or helium)
Hydrogen Gas Pressure Cycle tester Detail Image Hydrogen Gas Pressure Cycle tester Test Field and Standards Hydrogen Gas Pressure Cycle tester Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018ISO 19880-3 Applications Pressure repeat test of a high-pressure hydrogen gas valveInternal and external leak testing of high-pressure hydrogen gas valves Main Specifications Test fluid: Hydrogen gas, He gas, Nitrogen gas, Mixed gas, etc.Pressurization performanceMax. 100 MPa (1,000 bar)Maximum allowable working pressure or pressure rating according to KS B ISO 19880-3 (H70 class)Repetitive pressurization120,000 times × at least 6 seconds (10 times per minute) interval (with adjustment function)Automatic stop and notification after completing the specified number of repeated testsPressurized flow rate: It should be possible to replicate the aforementioned conditions in a volume of at least 1 L.Various data external transmission functions include 4 to 20 mA or 1 to 5 V, which record information on pressure and pressurization.KS B ISO 19880-3 (2018) Hydrogen Gas Refueling Station - Part 3: Valve① Conducting a repetition test for hydrogen gas pressure repetition test② Leakage test③ Satisfaction of test requirements for pressure repetition test under severe conditions (however, temperature conditions are separate)A test fluid recovery device
High-pressure gas element parts verification test equipment Detail Image High-pressure gas element parts verification test equipment Test Field and Standards High-pressure gas element parts verification test equipment Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018 Applications Infrastructure equipment for testing high pressure valves at hydrogen charging stations (KS B ISO 19880-3)It is a system that compresses and stores hydrogen gas used for testing at high pressure and is the basic equipment for testing the performance of valves, fittings, and pipes for high pressure gas Main Specifications Test fluid : Hydrogen Gas, He Gas, N2 Gas, Mixed gas, etc.gas compression deviceprimary medium pressure Compressor (Discharge pressure : 20 MPa or more / Discharge flow rate : 20 m3/h)secondary high pressure Compressor (Discharge pressure : 100 MPa or more / Discharge flow rate : 80 m3/h)gas storage device : Recovery Tank, Buffer Tank, High Pressure VesselValves and piping, measuring instruments, PLC(Control pannel)
Ultra High pressure gas test temperature controller Detail Image Ultra High pressure gas test temperature controller Test Field and Standards Ultra High pressure gas test temperature controller Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018 Applications Testable hydrogen filling station valve (KSBISO 19880-3) operating temperature and cooling gas valveIt is a test equipment that acts as an auxiliary part of the whole test, which implements the fluid temperature under the conditions required by the standard when testing the pressure and flow rate using hydrogen gas as a medium Main Specifications thermostatenvironmental chamber : Temperature Set Range -50℃ ~ 100℃, pressure-resistant design pressure 0.3 Mpachamber internal ventilation Fan : Motor Specifications - 1.0HP×4P×380/220V, explosion-proof motortemperature sensor, Gas DetectorHigh-temperature and low-temperature leak test chamberHigh-temperature leak test chamber : temperature Max. 90 ℃ (high-temperature liquid : glycerin), High pressure hydrogen (100 MPa) can be pressurized inside the chamberlow-temperature leak test chamber : temperature Max. -50 ℃ (low-temperature liquid : glycerin), High pressure hydrogen (100 MPa) can be pressurized inside the chamber
High pressure gas parts torque strength test device Detail Image High pressure gas parts torque strength test device Test Field and Standards High pressure gas parts torque strength test device Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018 Applications Check the screw connector on the hydrogen filling station valve(KS B ISO 19880-3) for leakage or damageThe test is to apply up to 150% of the design torque to a valve designed to connect a screw connection or pipe directly to check for leakage or damage Main Specifications torque generator(AC MOTOR)Motor : 1.5 kWTorque : 400 N·m or moreRPM : 10 or morePC CONTROL TYPEIt's a device that exerts a rotational force on the screw connection of the valve in the testthermostatic chamber : Temperature range -40℃ ~ 85℃Torque sensor, Control Pannel
Bending test equipment Detail Image Bending test equipment Test Field and Standards Bending test equipment Test Field and Standards Extreme environmental hazardous gas leak test Standards KS B ISO 19880-3:2018 Applications Test equipment to proceed with bending moment test in accordance with KS B ISO 19880-3, most of the ultra-high pressure gas materials and equipment are directly connected to screw connectors or pipes, so bending moment test is required.It is equipped to secure and support the valve by rotating the valve 90 degrees around the horizontal axis Main Specifications equipment structuresample fixture : A form capable of applying a load in the direction of the ground by rotating the sample by 90°pressurization Flexible Hose : Maximum Use Pressure : 100 MPameasuring instrument : oxygen concentrator, Pressure Transmitter, load device
Salt Water Spray Tester (DS-S-810, Fabricated equipment) Detail Image Salt Water Spray Tester (DS-S-810, Fabricated equipment) Test Field and Standards Salt Water Spray Tester (DS-S-810, Fabricated equipment) Test Field and Standards Valve and valve material brine corrosion test Standards ASTM B 117KS D 9502 Applications Seawater spray test of the actual valveInstead of using samples of existing products, place the actual product directly into the chamber and assess its corrosion resistance based on the standard. Main Specifications TemperatureSpraying room : RT ~ 35℃Saturator : RT ~ 60℃materialIN : PVC 15TOUT : Stainless 2TAir Nozzle : Pt 1/4" circular spray exposure 4 outletsSIZE : 2,500mm(L) × 3,000mm(W) × 2,400mm(H)
Safety Test Equipment for High Temperature Valves (Fabricated equipment) Detail Image Safety Test Equipment for High Temperature Valves (Fabricated equipment) Test Field Safety Test Equipment for High Temperature Valves (Fabricated equipment) Test Field Test Field High temperature furnace for valve testing Applications Demonstration test for the domestic development and reliability assurance of valves, piping, joints, etc., applied to equipment under extreme conditions of high temperature or high pressure. Main Specifications Temperature range : Room temperature to use temperature 800℃, maximum temperature 1,000℃Heating element : KANTHAL A-1 (electric high temperature furnace)Inside dimension (W × D × H) : 1,000mm × 1,000mm × 1,500mmThermal insulating material : insulation fire brickExterior material : Steel color coatingTemperature controller : Program PID Controller(thermostat)Display window : 100 mm × 100 mm (heat-resistant tempered glass)Bogie: Type 1 (bogie fabricated for sample transport)Pressure hole (to be discussed during fabrication)Power Source : 380 V/60 Hz
Aging Test Equipment for Valves (Fabricated equipment) Detail Image Aging Test Equipment for Valves (Fabricated equipment) Test Field Aging Test Equipment for Valves (Fabricated equipment) Test Field Test Field Thermo-hygrostat for valve test Applications Set rigorous environmental conditions and assess performance to determine if operation is feasible under the specified conditions.Performance evaluation includes testing for environmental resistance under various conditions, such as high and low temperatures, humidity, pressure, etc. Main Specifications Temperature : -40 ∼ 200℃Humidity : 20% ∼ 98％Internal area : 1,000mm(W) × 1,000mm(D) × 1,500mm(H)Temperature controller : TH-510 (thermostat)Heater : electric heater(fin type)Refrigeration method : Dual refrigeration systemRefrigerator : Fully enclosed reciprocating typeRefrigerant : R-22 & R-23 gasDehumidification Compressor : R-22 1/2HPBogie : Type 1 (bogie fabricated for sample transport)Power source : 380 V/60Hz
